File:BWR Mark I Containment sketch primary.png
| Uploaded by | 84user |
|---|---|
| Upload date | 2011-04-04T12:54:59Z |
| MIME type | image/png |
| Dimensions | 826 × 852 px |
| File size | 41.3 KB |
Summary
| Description |
English: Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus including downcomers, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors. The primary containment is outlined in purple.
Français : Diagramme/coupe d'un réacteur à eau bouillante (REB) typique de type Mark I à enceinte de confinement en béton avec tore d'acier sous-jacent, tel qu'utilisé dans les réacteurs de type REB/1, REB/2, REB/3 et certains REB/4.
Español: Diagrama/corte esquemático de un reactor de agua en ebullición tipico del tipo Mark I con recinto de contención en hormigón con toro subyacente en acero, como los utilizados en los reactores de tipo BWR/1, BWR/2, BWR/3 y algunos BWR/4.
Català: Esquema d'un reactor d'aigua en ebullició (BWR, Boiling water reactor) de tipus Mark I amb contenció de formigó i torus d'acer incloent baixants, com els utilitzats en els models de reactor BWR/1, BWR/2, BWR/3 i alguns BWR/4.
|
| Date | |
| Source | Sketched in Paint.net using 826 x 852 canvas inspired by Page 15 (pdf: 40), Containment Integrity Research at Sandia National Laboratories - An Overview, Manuscript completed: March 2006, Published: July 2006, id: NUREG/CR-6906 and SAND2006-2274P [1] - Prepared by Sandia National Laboratories for the U.S. Nuclear Regulatory Commission, Job Code Y6757. The two diagrams on the same page are labeled: Figure 5 Typical BWR Mark I Concrete Containment with Steel Torus. |
| Author | User:84user |
| Other versions |
|
|
This technology image could be re-created using vector graphics as a SVG file. This has several advantages; see Commons:Media for cleanup for more information. If a SVG form of this image is available, please upload it and afterwards replace this template with
{{vector version available|new image name}}.It is recommended to name the SVG file “BWR Mark I Containment sketch primary.svg”—then the template Vector version available (or Vva) does not need the new image name parameter. |
Licensing
|
This work has been released into the public domain by its author, 84user. This applies worldwide. In some countries this may not be legally possible; if so: 84user grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law. |